 |
|
|
|
Muti Polesstator Winding Machine Single Station For Brushless Stepping DC Motor
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Winding Type: | Teeth Winding Brushless Stepping DC Motor | How Many Turns: | 0 ~ 99999 Turns Can Be Set On Touch Screen |
|---|---|---|---|
| HS Code: | 84798110 BLDC Stator Needle Winding Machine | Winding Speed: | 300RPM To 500RPM According Wire Gauge |
| Working Station: | Single Station With One Needle Or Two Needles | Application: | Mass Production Of BLDC Stator Winding, Not Pilot Run |
| After SalesWinding Speed: | Engineers Available To Service Machinery Overseas | ||
| Highlight: | needle winder,bldc winding machine |
||
Muti Poles Stator Teeth Needle Winding Machine for Brushless Stepping DC Motor WIND-1B-TSM
Application:
WIND-1B-TSM is a simple needle winding mchine for mass production stator manufacturing,
Covering 6poles,8poles,9poles,10poles,12poles,14poles,18poles, such as Stepping Motor,
Brushless DC Motor Muti Poles Stator
During which 8 poles stepper motor can be wound 4times by 2 needles wind 2 slots per time.
Advantages:
1. Easy to operate, very suitable for types of stators pilot run, laboratory use
2. For some 8poles stator with dedicated winding diagram,
two needles can be applied to wind 2 slots per time
3. Change tooling and adjustment is simple,
4. Have a wide application of big and small, heave and light, thin and thick wire brushless stators
Which don't have a high slot filling rate and no wire displacement arraying needed
Winder Techanical Specification:
Wire diameter: 0.08~0.8mm
Stator ID:15mm~65mm
Stack height:7-100mm
Turns No.0-9999
Operation option: stepping/Auto
Stator poles: 6 poles, 8 poles, 9 poles,10 poles,12 poles,14 pole,18 poles (Custom made)
Air pressure:0.5~0.7MPa
Power:1KW, AC220V 50/60Hz
Weight: about 450kgs Dimension: 1600(L)x1000(W)x1500(H)mm
Question and Answer:
1. Which type of stator needle winding shall we select for our stator?
The machine WIND-1-TSM is widely used for 6 poles, 8 poles, 9 pole,10 poles,12 poles,14 poles and
18 poles
Stepper motor and BLDC motor with Single phase or three phase
Machine Winding, Indexing and Cutting automatically without arraying for slot filling rate not high stator
The winding machine WIND-1-TSM with winding not arrraying automatic indexing device
and angle swing cam device is very suitable for winding big and small wire , heave or light BLDC
motor stators
2. How is the training to operate the stator winding machine?
For machine tranining, usually you send one engineer people to our plant to inspect before delivery,
WIND-1-TSM is not a complicated machine, if your engineer have experience then you don't need to
come and we can take some vidoes for you to operate
3. Is the machine from you is switched on and put into operation?
Yes, machine is switched on from machine side for power on machine and
Start, Emergency button , Auto/Step swith to operate machine
4. I have not wound stator. Why do you need for wound stator?
The wound stator can show Shanghai Wind Automation
the winding diagram which include winding way,bridge wire, terminal wire,
If you don't have wound stator, please provide winding drawing,
Below samples and drawing are needed for machine manufacturing and commissioning:
1. Stator stack 5pcs without winding with insulation cap or isolation paper
2. Wound stator 1pc
3. Copper wire 1 roll enough for winding 10pcs stators
4. Stator lamination drawing and winding drawing
Below is a 9 teeth stator picture wound by stator winding machine WIND-1B-TSM
Other Products
-
Straight Lamination Stator Needle Winding Machine For BLDC Motor
-
12 Slots Needle Winding Machine BLDC Motor Stator 1.13mm AWG17 Copper Wire
-
BLDC, PMSM and EV Motors Stator Needle Winding Machine For Straight Lamination Stator
-
Thin Wire Needle Winding Machine Small BLDC Motor Stator Four Station Muti Pole Winder
-
BLDC Motor Stator Needle Winding Machine 60RPM Parallel Wires To 600RPM Thin Wire
-
Four Nozzles Stator Needle Winding Machine For 4 Poles Shaded BLDC Motor