3.0KW 2500r/Min Two Flyer Winding Machine For Wiper Mixer Motor

Two Flyer Fully Automatic Winder Lap Winding Machine For Wiper Mixer Motor WIND-STR

 

 

 

Application:

 

This armature winder WIND-STR is a fast flyer coil winding machine for motor mass production

 

manufacturing of hook type commutator armature,Mixer,Vacuum cleaners, Hammers,Power tool...

 

 

 

Working Principle:

 

This fully automatic winding machine WIND-STR adapts double flyers structure, 2pcs Mitsubishi servo

 

motor drive the two flyers rotation, and 1pc Mitubishi indexing servo motor make sure the precise

 

indexing. 

 

During working, the armature stack is clamped tightly by left and right side two winding tooling and shaft

 

clamping device. When flyers are running, wire goes through the wire holder, tension device then enters

 

hollow spindle, comes out from wire sliding wheel, then the wire slides into the armature slot through flyer

 

wire guiding wheel. After this step, armature into the slot to do winding.

 

Armature double flyer winding machine WIND-STR takes conductors from two separate reels of wire

 

simultaneously to wind two slots together. Once would with the correct number of turns and connected to

 

the respective commutator hook, the armature is indexed automatically to the next pair of slots to be

 

wound.

 

 

 

Advantages:

 

1. Crazy Fast , in normal condition can wind at speed 1000~1500rpm, get one piece wound armature in

 

    23s

 

2. The winding parameter can be setted on touch screen for different armatures, easy operation

 

    as 12 slots, 24 hook 

 

         12slots, 12slots

          

 

 

Quick details:

 

Armature winding manufacturing requirement	Armature lamination drawing, winding diagram
Armature winder application	Car motor, automotive motor,Wiper motor, mixer motor
Armature commutator type	Hook type armature, not slotted type

 

 

 

Parameter Data:

 

Wire diameter range: 0.16~1.2 mm

Armature diameter: 20~85 mm

Stack length: 10~70 mm

Shaft diameter: 3~15 mm

Shaft length: less than 250mm

Armature Slot: even slot

Turn number: 0~9999

Commutator diameter: 8~40 mm

Winding speed: 0~2500 rpm

Winding motor power: 1.5KWX2

Angle detecting speed: 0~3000 rpm

Angle detecting motor power: 0.75KWX1

 

Air supply pressure: 4~6 Kg/cm2

The machine total power: 4.0 KW

Voltage: three phase AC 380V 50/60 Hz

Weight: 1250 Kg

Dimension: 2000(length)X1000(width)X1800(height)mm

 

Package size 1800*1510*1920mm  is about 5.2 CBM

 

HS code: 8479811000

 

 

 

Main Parts:

 

Japan Mitsubishi PLC

Japan Mitsubishi or Panasonic servo motor control system

5.7’’ colorful touch screen system

SMC Cylinder