Payment & Shipping Terms:
|Hub Motor Stator Poles:||12 Pol 24 Pol 36 Pol||Winding Output:||7 Minutes For 2 Pieces Stators (Two Working Station)|
|Working Station:||Single Station Or Double Station Option||Automation Type:||90% Percent Pass|
|Max Slot Filling Factor:||For The Hub Motor Winding, 68% Slot Filling Rate Is The Highest||After Sales:||Engineers Available To Service Machinery Overseas|
motor coil winding machine,
automatic coil winding machine
E-Bike In Wheel Coil Winding Machine For Brushless 12,24,36poles Hub Motors WIND-HMW-2
Double station E-bike PMDC wheel motor winding Brushless hub motor stator winder muti coils winding machine wind the 15pcs parallel wires up to 0.51mm, with 6,8,10,12,14,15 parallel wires for different voltage motor such as 24,36,48,62V
Electric bike, PMDC wheel motor, hub motor, wheel motor, outrunner motor
|Fully automatic stator winding||
winding,indexing, winding parallel wires with efficiency
Muti wires winding
Winding device with tension fram can ensure parallel wires
winding avoid from twisting
Special design Tooling
Precise Tooling ensure the winding quality and can be changed
easily for types stators
Max Wire handled
Core length: 6-75mm
Slots Number: max 63
Max wires numbers winding at one time: 15 pieces (Usually 6,8,10,12,14,15 bunch wires)
Cycle Time for stator winding: 54 slots, 11 pieces wire for one time winding, including loading/unloading,
it takes 7 minutes for 2 pieces stator Around 130pcs/ shift (8hours)
Winding servo motor: MITSUBISHI
Indexing servo motor: MITSUBISHI
Wire arraying servo motor: MITSUBISHI
Ask and Answer:
1.How the motor wheel winding machine do the indexing: manually or automatically?
Automatically indexing by Mitsubishi servo motor
2. How the E-bike motor stator is fixed during winding process?
By pneumatic device
3. What range of diameters of copper wire can work your machine (minimum and maximum)?
What the muti coils winding machine had done is 0.51mm with 6,8,10,12,14,15 parallel wires
4. Which is the range of stacking lengths the winding machine can work?
Stator Stacking length 6 to 75mm
5. Is it possible to press and compact the wire copper during or after winding?
The winding heads protrude maximum 15mm from both sides of the stack.
The Hub motor winding machine machine WIND-HMW only winding, no function to press and compact,
and as machine wind compactly, the winding heads protrude maximum 15mm from both sides of the
stack can be assured
6. Does the machine any limitation in the dimension of the width of the open slot?
Yes, 2mm is absolutely OK to wind in our machine WIND-HWM
7. How many samples would you need to adjust the winding machine in your facilities?
Around 4pcs to 5pcs stator samples
8. What is the height of the machine on the work area of the operator?
9. Have you manufactured any machine for a similar stator?
Yes, we had supplied 12pcs winding machine working in this E-bike motor manufacturer
10. How is the setting process to change the number of turns per coil?
Please set the number of turns parameter on touch screen
11. How is the stator fixed to the machine during the winding process?
Is it possible to have different lengths and different shapes of the motor wheel shaft
Stator is fixed on machine by penumatic device during winding,
If different shape of motor, toolings can be changed in 1hour
If only different stack lengths, mechanical adjustment is easy
Please click below picture to view video