 |
|
|
|
Growler How To Test Armature Resistance Surge Dielectric Hi Pot With Starting Motor Judge
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Condition: | New | Certificate: | Main Parts CE |
|---|---|---|---|
| Working Station: | Double Station | Automation Type: | Fully Automatic |
| Testing Item Content Display: | Test Result Intuitive Display On Screen One By One | Armature Slots: | 13, 17, 19 (few), 21,23,25,27, 28,29,33slots (common) |
This armature testing machine is a fully automatic machine for armature performance testing. All the test quality report can be generated and printed.Machine has various testing options available to do testing.
This starter armature tester WIND-ATS-02 had worked for many local big famous starter manufactures including Huachuan,Shendian.
One of them purchased 5pcs at the first time and then 7pcs, we can say 80% of the local starter manufacturers are using our testing device,
Our engineering team bulid this tester according to customers requirement and had much experience,
upgrade the tester gradually in past years, combine and considering starter manufacturers' feedback and new requirements,
In short word, the test items are based on starter armature manufaturers' requirements, you can depend on it for judging your armature quality,
The Armature tester WIND-ATS-02 can test armature below 36slots, so it is OK with slots from 12 up to 33 slots.
Yes, all the result is showed on screen slot by slot,
we took a video focus on the screen with a 23slots armature, please refer to attached video,
You can see on the screen 6 test items being tested one by one with 23 data come out gradually,
(1)Machine specifications
| Power Supply Voltage | AC 220V, 50Hz |
| Air source Pressure | 0.4~0.6MPa |
| Test cycle | 8~9s (according to 33bars) |
| Temperature | 0~45ºC |
| Dimension | 950x1250x580mm |
(2)Testing specifications
| Test Items | Test Description | Test result |
| Bar to Bar resistance | 0.01mΩ~10mΩ | ≤±0.5% Full scale |
| Welding resistance | 0.01mΩ-10mΩ | ±10μΩ |
| 180ºC cross resistance | 0.01mΩ-10mΩ | ≤±1.5% Full scale |
| Surge | 100-1000Vpp (Max 36sets waveform) | ±5% |
| Isolation resistance | DC 500V | 0.1-500MΩ ≤±5% Full scale |
| Hipot | AC 100-1000V | 0-20mA ≤±.5% Full scale |
(3) Application
Suitable for auto starter armatures to do performance testing.
(4) Features
1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER)
Four-terminal measurement to ensure accuracy
2. Welding resistance,0.001mΩ-10mΩ (Out of range display OVER)
Six-terminal measurement to ensure accuracy
3. Cross resistance 0.01mΩ-10mΩ
Four-terminal measurement to ensure accuracy
4.Surge 100-1000V (100V/time)
Pulse crest:0.5u sec, Frequency 1~40MHz
Standard waveform is Write, OK waveform is Green, NG waveform is Red
5.Isolation resistance DC 500V
Testing time:1~10s (0.1s/time)
Range:1~500MΩ
Accuracy: ≤±5%
6.Hipot AC 100-1000V
Testing time:1~10s (0.1s/time)
(5)Machine configuration
15'' Touch screen
Sampling Chip: BB/TI (USA import)
Relay:NAIS(Japan Panasonic)
High voltage relay:Toward
Pneumatic parts: Airtac
Other Products
-
Van Car Motor Armature Testing Equipment Insulation Voltage Tester Quality Analysis
-
BLDC Motor Rotor Armature Testing Machine BEMF Magnetic Detection Single Station
-
Starter Armature Testing Equipment Spins Rotor During Double Station WIND-ATS-02
-
BLDC Motor Electric Motor Testing Equipment Hysteresis Dynamometer Current Voltage RPM Tester
-
Commutator Roundness Electric Motor Testing Equipment For Brushed DC Motor
-
Auto Starting Motor Armature Testing Machine For Slots Below 36