Wedge Fillers Placement Slot Insulation Machine Armature Coil And Stack DMD PMP

Armature Coil And Stack DMD PMP Wedge Fillers Placement Motor Insulation Machine WIND-IW-2

(1) Application:

This slot top cell forming and inserting machine WIND-IW-2 automatical form and insert wedge to form

electrical insulator for coils and stack.

(2) Parameter:

Armature O. D: 20-55mm

Length of lamination: Max 60mm

Shaft length: 32~250mm

Shaft O. D: 6~20mm

Slot number: 8-24 slots

Commutator O. D: 16~50mm

Length of wedge: 15-60mm

Speed regulation range: 0~60Hz

Wedge shape: Flat, U or R shape

Thickness of wedge: 0.2 mm ~ 2.0 mm

Efficiency: 0.5sec - 0.8sec/per slot, loading-Clamp Feeding-unloading (total 8~10sec/cycle for

12 slots armature)

Air source: Air pressure: 4~6kg/cm2

Machine power: 1.0KW

Tooling/fixture: Fast changing integrity forming wheel structure

Voltage: AC220V± 10%, 50/60Hz

Weight: About 400Kg

Dimension: (L)910 x (W)880 x (H)1300mm

(3) Main components:

PLC: MITSUBISHI or Omron programmable controller

Relay: OMRON

Proximity switch: OMRON

MITSUBISHI or Panasonic frequency converter

Touch screen: WENVIEW PLD(7")

Air switch: MITSUBISHI

Power source: Mingwei

Switch: SCHNEIDER

Brake: MIKIPULLEY (Japan brand)

Ball bearing: UBC (USA brand)

Linear guide: ABBA (Taiwan brand) or CPC or Shangying

Cylinder: SMC

Air source treatment elements or electromagnetic valve: SMC

Place insert the insulation wedge to armature, insulate the armature winding and stacks, also fixten the

armature windings.After winding, use thick wedge normally 0.5mm while insulaiton polyester is usually

0.25mm to insert to armature, tight the armature and strength the winding and reduce motor noise​.

Please click below photo to view video